Jinan Yuki Bearing Co., Ltd.
Jinan Yuki Bearing Co., Ltd.
Angular Contact Ball Bearings   Bearing Units   Cylindrical Roller Bearings  
English
English
  • Home
  • Stock Categories
    • Angular Contact Ball Bearings
    • Bearing Units
    • Cylindrical Roller Bearings
    • Deep Groove Ball Bearings
    • Needle Roller Bearings
    • Plain Bearings
    • Self Aligning Ball Bearings
    • Spherical Roller Bearings
    • Tapered Roller Bearings
    • Thrust Ball Bearings
    • Thrust Roller Bearings
    • Wheel Bearings
    • timken 510050 Bearing
    • timken ha590522 Bearing
    • timken sp450701 Bearing
    • ha590166 Bearing
    • Kaydon Slewing Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Wide Series Cylindrical Roller Bearings
    • Full Complement Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
    • Thk Linear Guide
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
  • Technical Articles
  • Angular Contact Ball Bearings
  • Bearing Units
  • Cylindrical Roller Bearings
✖

Home

Stock Categories

Technical Articles

Angular Contact Ball Bearings

Bearing Units

Cylindrical Roller Bearings

Home>Products>Thk Miniature Linear Guide>SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series
  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series

THK SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series

category

Thk Miniature Linear Guide

THK SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L Bearing SPECIFICATIONS

  • What is the best Jinan Yuki Bearing Co., Ltd. place to buy SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series online? Thk Miniature Linear Guide Manufacturing Service . Medium Duty Bearing Duty Setscrew Ball Bearing Bearing Family

  • THK

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

  • Medium Duty
  • Setscrew Ball Bearing
  • 212 Series
  • Cast Iron
  • Top Angle Take-Up
  • Single Lip
  • 55.0000 mm
  • Yes
Download THK SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L Spec Sheet
Jinan Yuki Bearing Co., Ltd.

Jinan Yuki Bearing Co., Ltd.China

  • Jinan Yuki Bearing Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series Product Description

  • Medium Duty
  • Setscrew Ball Bearing
  • 212 Series
  • Cast Iron
  • Top Angle Take-Up
  • Single Lip
  • 55.0000 mm
  • Yes
  • 212 Series
  • Class 10
  • Steel
  • Standard
  • Round
  • Steel
  • Steel
  • Setscrew
  • Steel
  • No
  • Non-Expansion
  • Steel
  • Rubberized
  • Unirex N2
  • No Coating
  • Rogersville, TN
  • 3500 rpm
  • Nylon
  • Std Retainer
  • Standard
  • Self Centering
  • Set Screw
  • 16.3 LB
  • 782475431793
SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series pdf

THK SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series specification

Basic dynamic load rating C61600 kN
Calculation factor kr660
Design variant/featureBC4.10/W33WI
Basic static load rating C0183000 kN
d1400 mm
F1521 mm
b22.3 mm
α20 °
Mass bearing11300 kg
C1360 mm
D1900 mm
r3,4 min.12 mm
B1360 mm
Fatigue load limit Pu10400 kN
K12 mm
D1 ≈1670 mm
r1,2 min.40 mm

SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series manufacturers inventory bellow

No.BrandBDETFLJC
135TAD20NACHI - 200 mm - 84 mm - - - 109 kN
ZGB 120X135X120INA120 mm135 mm - - - - - 4320 kN
5135Ruville - - - - - - - -
XHGB35135SNR - 136,5 mm - - - - - 84 mm
135PCR2502NSK - - - - - 250 mm150 mm -
135PCR2701NSK - - - - - 270 mm180 mm -
135RIF580Timken57,15 mm457,2 mm435 mm - 365 mm - - 57,15 mm
135RIF582Timken104,77 mm527,1 mm494 mm - 376 mm - - 104,77 mm
135RIJ580Timken57,15 mm457,2 mm435 mm - 365 mm - - 57,15 mm
135RIJ582Timken104,77 mm527,1 mm494 mm - 376 mm - - 104,77 mm
135RIN580Timken57,15 mm457,2 mm435 mm - 365 mm - - 57,15 mm

 

SHS30V1ZZ(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS SeriesAppropriate attachment bolt, rec. tightening torque:2280 N·m; Oil level, max.:108 mm; P180°:3200 kN; N1:42 mm; A1:360 mm; P150°:2500 kN; Ca:214 mm; Mass housing:470 kg; P55°:8000 kN; Q180°:2100 kN; P90°:3900 kN; Da:620 mm; Cap bolt, rec. tightening torque:600 N·m; A
SHS30R1ZZ(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS Seriesd:110 mm; Grease:3 800 min-1; Pu:2.159 kN; Oil:4 500 min-1; D:170 mm; rs:1 mm; Weight:1.46 kg; ra:1 max; Dynamic (Cr):57.600 kN; Static (Cor):56.200 kN; Bearing designation:16022  ; B:19 mm; Da:165 max; da:115 min;
SHS30V1(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS SeriesP150°:66.7 kN; Ca:72.619 mm; P90°:111 kN; Cap bolt recommended tightening torque:1220 N·m; PosiTrac Plus contact element:2 x B10724-122; End plug (suffix Y):EPR 27; A1:120.65 mm; Cap bolt, SAE grade:8; Cap bolt:2 x 1-8 UNC; Pa:22.2 kN; Initial grease fill:379.89 g; H1:133.35 mm; da:12
SHS30V1UU(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS SeriesAttainable speed for grease lubrication:27000 r/min; Static axial stiffness, preload class B:129 N/µm; Mass bearing:0.19 kg; Calculation factor (back-to-back, face-to-face) Y2:1.41; r1,2 min.:1 mm; Number of balls z:19; Preload class B GB:310 N; da min.:44.6 mm; db max.:47 mm; Ball diameter Dw
SHS35C1(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS SeriesBasic Interchange MCGILL:-; Basic Interchange:-; Accessories:Mast Guide Type- 311; Basic Interchange NDH:-; Basic Interchange SPLIT:-; Basic Radial Load Rating-Static SCO:73100 lbf; Basic Radial Load Rating-Dynamic DC:16400 lbf; Basic Interchange BCA:-; Basic Interchange NSK:-;
SHS30R1UU(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS SeriesB:28.00 mm; Oil Speed Rating Open/Shielded n2:4000 rpm; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:85200 N; Fillet Radius ra:2.00 mm; Accessories:One Seal; D:180.0000 mm; Sealed Speed Rating n3:2200 rpm; d:120.000 mm; Basic Static Radial Load Rating Co:80000 N;
SHS35LC[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​SS,​SSHH,​UU,​ZZ,​ZZHH]+[165-3000/1]L[H,​P,​SP,​UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS Seriesda:130.175 mm; L:539.75 mm; RG:3/8 NPT; H1:160.35 mm; R2:39.688 mm; Eye bolt:2 x 3/8-16 UNC; A2:215.9 mm; N1:28.575 mm; Da:269.999 mm; A1:158.75 mm; P180°:96.1 kN; H:317.5 mm; J1:95.25 mm; H2:63.5 mm; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:92.5 kg; End plug (suffix Y):EPR 16; PG:1/4 NPT; R1:
SHS30V1SSC1(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS SeriesD:52.0000 mm; Basic Static Radial Load Rating Co:21200 N; Accessories:Shield & Seal & Snap; Oil Speed Rating n2:11000 rpm; Sealed Speed Rating n3:8000 rpm; Basic Dynamic Radial Load Rating C:22900 N; Grease Speed Rating n1:8000 rpm; B:22.20 mm; d:25.000 mm; Fillet Radius ra:1.00 mm;
SHS30V1SS(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS SeriesOil:169.450 kN; rs (min):3 mm; Static (Cor):13.9 mm; d:190 mm; with cylindrical bore:890 min-1; D:320 mm; Pu:1130 kN; Dynamic (Cr):7.5 mm; B:104 mm; Grease:1840 kN; with tapered bore:1 100 min-1;
SHS30R1ZZC1(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS Seriesr5 min.:0.6 mm; r3,4 min.:1.5 mm; Da min.:79 mm; Reference speed:4800 r/min; Calculation factor Y1:1.6; Basic static load rating C0:183 kN; Basic dynamic load rating C:160 kN; Da max.:82 mm; T:43.5 mm; d:50 mm; Calculation factor e:0.43; Mass bearing pair:1.12 kg; K:3 mm; Limiting speed:7500 r/min;
SHS35LC[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​SS,​SSHH,​UU,​ZZ,​ZZHH]+[165-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesD2:136 mm; Number of balls z:27; Preload class A GA:240 N; Basic static load rating C0:40 kN; Calculation factor f2C:1.05; Attainable speed for grease lubrication:14500 r/min; rb max.:1 mm; Da max.:143 mm; Preload class C GC:1440 N; db max.:113.5 mm; Basic dynamic load rating C:44.9 kN; a:28.9 mm; C
SHS30V1ZZC1(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS SeriesGrease Speed Rating n1:5000 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6700 rpm; Basic Dynamic Radial Load Rating C:60500 N; B:39.70 mm; D:90.0000 mm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:5000 rpm; d:40.000 mm; Basic Static Radial Load Rating Co:43000 N;

 

 

SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series Video

 

Caged Ball LM Guide - THK Technical Support

1. Rotary ball bearing. Conventional structure. Caged Ball structure ... Number of blocks used in close contact. 2. 3. 4. 5. 6 or more. Normal use.Missing: 135-3000/1] ‎| Must include: 135-3000/1]

THK General Catalog

General Description. A-1. LM Guide. A-25. THK General Catalog. General Table of Contents. A-2. A-2. A-3. A-7. A-7. A-7. A-7. A-7. A-8. A-8. A-9. A-10. A-13.

Product Ordering Guide - THK

3 • Product Ordering Guide - Linear Motion Guides. SHS15. C. 1 ... 6. 5.2. 7. 2. SHS30LC. 42. 90. 131. 72. 52. M10 8.5. 105 11.5. 15. 35. 8.

Models SR-W, SR-WM, SR-V and SR-VM

The maximum length under “Length ＊” indicates the standard maximum length of an LM rail. (See 團1-214.) Static permissible moment ＊: 1 block: static ...Missing: SHS35C[ ‎5,​

Standard, Accuracy and Preload Selectable, SHS Series (THK ...

A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.

Linear Guideway

1-1 Linear Guideways Offer the Following Outstanding Features . ... 5. 2-2-3 MGN/MGW Non-interchangeable Type . ... 3-8 MGN-C/MGN-H Type .

LM Guide - Albeco

團1-292. KR. 團2-86. High Torque Caged Ball Spline. SLS. 團3-36. SLS-L. 團3-36 ... 團6-2. Precision Linear Pack. ST/ST-B. 團5-2. STI. 團5-2. LM Stroke.

THK SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L INTERCHANGE

Thk Miniature Linear Guide Part series SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L is a potential replacement for these common bearing part numbers:

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

  • SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L

Contact Us

Jinan Yuki Bearing Co., Ltd.
AddressA4-01, No. 3, Fenghuangshan Road, Tianqiao District, Jinan City, Shandong Province, China
Phone(Working Time)86-15186967668
Fax
  • Jinan Yuki Bearing Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

THK SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L Technical Articles

75x130x25 bearing price list
6215 Bearing 75x130x25 Open Ball Bearings VXB Brand6215 Ball Bearing 75x130x25 mm Chrome Steel Quality: ABEC 1 Chrome Steel Open Ball Bearing 6215 that has ABEC 1 quality, 6215 bearing is a popular item  6215-2RS ball bearing 75x130x25 sealed...
63.5x107.95x25.4 bearing catalogue
29586/22 bearing, Single row taper roller bearings 63.5x107.95x25.4high quantities 29586/22 Bearing dimension: 63.5x107.95x25.4, Enquiry for global 29586/22 Single row taper roller bearings suppliers for Virgin Islands (British)  Tapered...
120x180x38 bearing number and size chart pdf
NSK HR 32024 XJ 32024X 120X180X38 mm Tapered RollerBearing is still sealed and in original box. Un-used new condition NTN 32024XU bearings | 120x180x38.0mm - Nodes bearingNTN 32024XU bearing, Tapered roller bearings (metric series), Dimensions:120mm...

Thk Miniature Linear Guide CATEGORIES

  • Angular Contact Ball Bearings
  • Bearing Units
  • Cylindrical Roller Bearings
  • Deep Groove Ball Bearings
  • Needle Roller Bearings
  • Plain Bearings
  • Self Aligning Ball Bearings
  • Spherical Roller Bearings
  • Tapered Roller Bearings
  • Thrust Ball Bearings
  • Thrust Roller Bearings
  • Wheel Bearings
  • timken 510050 Bearing
  • timken ha590522 Bearing
  • timken sp450701 Bearing
  • ha590166 Bearing
  • Kaydon Slewing Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Bearing Slewing Ring
  • Wide Series Cylindrical Roller Bearings
  • Full Complement Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Cylindrical Roller Bearings
  • Thk Linear Guide
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
More

Customers Who Viewed THK SHS35C[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]+[135-3000/1]L Bearing Also Viewed

  • SHS35C1(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS Series
  • SHS30V1ZZC1(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS Series
  • SHS30V1ZZ(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS Series
  • SHS30V1UU(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS Series
  • SHS30V1SSC1(GK) THK Caged Ball Linear Guide (Block Only) Standard Grade Interchangeable SHS Series

Top Products

AST 22236MBW33 spherical roller bearings ISO 29472 M thrust roller bearings Toyana 2208 self aligning ball bearings
NAP212-39 KOYO bearing units Timken 25580 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Jinan Yuki Bearing Co., Ltd.. Copyright © 2017 - 2022 All Rights Reserved.

  • Home
  • Stock Categories
    • Angular Contact Ball Bearings
    • Bearing Units
    • Cylindrical Roller Bearings
    • Deep Groove Ball Bearings
    • Needle Roller Bearings
    • Plain Bearings
    • Self Aligning Ball Bearings
    • Spherical Roller Bearings
    • Tapered Roller Bearings
    • Thrust Ball Bearings
    • Thrust Roller Bearings
    • Wheel Bearings
    • timken 510050 Bearing
    • timken ha590522 Bearing
    • timken sp450701 Bearing
    • ha590166 Bearing
    • Kaydon Slewing Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Wide Series Cylindrical Roller Bearings
    • Full Complement Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
    • Thk Linear Guide
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
  • Technical Articles
  • Angular Contact Ball Bearings
  • Bearing Units
  • Cylindrical Roller Bearings
✖

Home

Stock Categories

Technical Articles

Angular Contact Ball Bearings

Bearing Units

Cylindrical Roller Bearings

Contact Us